View Single Post
Old 04-29-2008, 10:27 AM   #21 (permalink)
magnethead
Tech Hardware Team
 
Join Date: Mar 2006
Location: TX
Posts: 1,316
OS: XPH, 2K

My System

Blog Entries: 2
Send a message via AIM to magnethead
Re: Remote Control Molex Connector Kit Troubles

Quote:
Originally Posted by Done_Fishin View Post
No, what I am saying is that this unit you bought works on 12 Volts and that the input can be 12 volts =/- a couple of volts AND that the item to which it is being connected should also work off of 12V or whatever voltage is being fed into it. Remember that this was originally manufactured for use in cars which work on 12Volts , but the battery when fully charged will be approx 14 Volts.

so if your gun works off of a 6 Volt battery (or pack) and you try using this, it probably won't work.
right.

Put yellow Power supply to red controller.
Put black Power Supply to either black controller ground.
Put white to positive of whatever you're driving with the controller, put remaining black to ground of whatever you're driving with the controller.

But whatever you're driving with the controller MUST be a 12 volt device.
__________________
AIM me for fast support.
For proper support: what are you running? video card, cpu, m/board, ram, power supply, brand, wattage, any error message?
Will this PSU run my card? If you're having to ask, it probably won't. PCI-E requires 26 amps at 12 volts. That's a 650W PSU. Power Supply Info and Selection
Why is my CPU hot? Info on thermal compounds & application
magnethead is online now   Reply With Quote