|
Re: Belkin access point / port forward
I already have my ip addresses for the DHCP to be a bank from 192.168.2.2 to 192.168.2.24 The second router is setup for access point and its ip address is 192.168.2.25 The NAT is enabled on the first router that is DHCP enabled. The NAT is not enabled on the access point. Both are the same model of Belkin Router. There is a section in the configuration that allows you to select access point. When you select access point for the router it automatically disables NAT and DHCP configuration is removed from the setup. My computers downstream of the access point have ip addresses192.168.2.59 and 192.168.2.60, that I gave them. I want to port forward the ports 911 and 912 to computer 192.168.2.59 See the screenshot.
|