Sorted! I hope!!!
Thanks Koala - you have another success for the list!
My Config File:
Quote:
[settings]
username=Donald_Gray
team=85015
asknet=no
bigpackets=no
machineid=1
[http]
active=no
host=localhost
port=8080
usereg=yes
[core]
cpuusage=40
|
I have not put a checkpoint = n as at the moment I don't know the usage or setting... Any ideas?
One thing I have noted with a 4 core processor and the usage meters (Third party or MS) is that a single core is flat out if indicated at 25% ... IE 4 cores at 25% each = overall processor = 100%
For the benefit of other multi-core users, I have noticed that when the client is first started, after a few seconds the cores hit maximum for about 5 seconds & then back off to the settings in the config file.
The image below shows the results I have got at the moment. I shall leave it at 40% for a while before incrimenting it....
Many thanks for your help...
