Tech Support Forum - View Single Post - Port forwardin with Router and wireless ethernet bridge

pedroguerreiro5 · 12-14-2007, 04:00 AM

Hi guys

I have a wireless network at home, with:

Cable Modem --- Router/Acess Pont (Linksys WRT54GL)--- WET11 Linksys Ethernet Bridge.

The router connects directly to my pc and spreads the internet around the home. In my pc I can port forward with no problem at all. In my 2 laptops that connected to the router wireless I can also port forward. But another pc witch connects via the Wireless-B (ethernet bridge) I simply cant.

Router/Acess Point - 192.168.1.1
DHCP Range - 50
Starting IP 192.168.1.100 ---- End 192.168.1.149

Pc connected directly to the router 192.168.1.100
The 2 Laptos are in DHCP mode, they usually have ip´s 192.168.1.101 and 192.168.1.102

The Ethernet Bridge is configured out ot the DHCP range as read it should (all tho I tryed with an Ip in the DHCP range still doesnt work), and has the Ip 192.168.1.255---- and the gateway is 192.168.1.1.

In the pc I have connected via ethernet bridge I have acess to the internet, but port forwardin is not being done.

I´m using WEP encryption... as this is the only possibility for the ethernet bridge.

Any advise on how to procede?

Thx in advance

PG

12-14-2007, 04:00 AM	#1 (permalink)
pedroguerreiro5 Registered User Join Date: Dec 2007 Posts: 2 OS: XP	Port forwardin with Router and wireless ethernet bridge Hi guys I have a wireless network at home, with: Cable Modem --- Router/Acess Pont (Linksys WRT54GL)--- WET11 Linksys Ethernet Bridge. The router connects directly to my pc and spreads the internet around the home. In my pc I can port forward with no problem at all. In my 2 laptops that connected to the router wireless I can also port forward. But another pc witch connects via the Wireless-B (ethernet bridge) I simply cant. Router/Acess Point - 192.168.1.1 DHCP Range - 50 Starting IP 192.168.1.100 ---- End 192.168.1.149 Pc connected directly to the router 192.168.1.100 The 2 Laptos are in DHCP mode, they usually have ip´s 192.168.1.101 and 192.168.1.102 The Ethernet Bridge is configured out ot the DHCP range as read it should (all tho I tryed with an Ip in the DHCP range still doesnt work), and has the Ip 192.168.1.255---- and the gateway is 192.168.1.1. In the pc I have connected via ethernet bridge I have acess to the internet, but port forwardin is not being done. I´m using WEP encryption... as this is the only possibility for the ethernet bridge. Any advise on how to procede? Thx in advance PG Last edited by pedroguerreiro5 : 12-14-2007 at 04:03 AM.