Tech Support Forum - View Single Post

nXus · 12-09-2007, 07:32 AM

Yes i tried all the jumper settings. Although it's sata so shouldn't matter.

I used another drive instead. also a WD2000JD but 0HBB0(close enough)
I forgot to take the delay spinup pin off and it did the same thing as the other one did. Until i realised what i had done. Took that off and it was fine.

But i did double check this on the problem drive. Even made sure the actual metal contact hadn't been stuck in there.

I'm still baffled. At this stage if the raid card dies that h/d may be a brick

12-09-2007, 07:32 AM	#3 (permalink)
nXus Registered User Join Date: Dec 2007 Posts: 2 OS: xp/vista	Re: Bios detecting h/d as nothing Yes i tried all the jumper settings. Although it's sata so shouldn't matter. I used another drive instead. also a WD2000JD but 0HBB0(close enough) I forgot to take the delay spinup pin off and it did the same thing as the other one did. Until i realised what i had done. Took that off and it was fine. But i did double check this on the problem drive. Even made sure the actual metal contact hadn't been stuck in there. I'm still baffled. At this stage if the raid card dies that h/d may be a brick