Quote:
Originally Posted by Aus_Karlos
What is your Power Supply? How many Watts does it have and how many Amps are on the 12v rail.
Make sure you are using the Vista Drivers not the XP ones. And Vista is completely up-to-date.
|
It's an Antec True 550. 550 watts. I am using Vista drivers and it's up to date. Thanks
Model: True550
FEATURES
Maximum Power
550 Watts
Switches
ATX Logic on-off
additional power rocker switch 115/230 Volt selector switch
Special Connectors
AUX Power
ATX12V
3-pin Fan Sensor
Fan Only
SATA
Transient Response
+5V,+12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change.
P. G. Signal
100-500ms
Over Voltage Protection
recycle AC to reset
+5V trip point < +6.5V
+3.3V trip point < +4.1V
+12V trip point < +14.4V
Leakage Current
<3.5mA @ 115VAC
DIMENSIONS
Unit Size
5.9"(L) x 5.5"(W) x 3.4"(H)
15cm(L) x 14 cm(W) x 8.6 cm(H)
Net Weight
5lbs.
2.3kg
INPUT
Input Voltage
115 VAC / 230VAC
Input Frequency Range
47Hz to 63Hz
Input Surge Current
< 60A @ 115VAC
Input Current
10.0A for 115VAC
6.0A for 230VAC
Hold-up Time
>17ms at Full Load
Efficiency
> 68%
EMI/RFI
FCC Class B
CISPR22 Class
OUTPUT
+5V -5V +12V -12V +3.3V +5V
SB
Max. Load
40A* 0.5A 30A* 1.0A 32A* 2A
Min. Load
0A 0A 0.8A 0A 0A 0A
Load Reg.
±3% ±5% ±3% ±5% ±3% ±5%
Ripple V(p-p)
50mV 50mV 120mV 120mV 50mV 50mV
* +5V, +3.3V & +12V maximum output 530 Watts max.
ENVIRONMENTAL
Operating Temp.
10 to 50șC
Operating Alt.
Sea Level 10,000 ft.
Non-Operating Vibration
Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
MTBF
80,000 hrs. @ 25șC
Approvals
UL, TUV, CB, VDE, FCC CLASS B, DEMKO, NEMKO, SEMKO, FIMKO