butterfly77049

Bios settings have to say "IDE mode" if you are just connecting a device and not using the RAID functions?

There are three settings that are controlled by "jumpers" on the rear of any device with the settings "master", "slave", or "cable select".

Through the process of elimination you can try connecting the device with different settings if it doesn't work with the current one?

Look for a label on the device that tells you how to set them, which requires you remove a "bobby pin" clip that is usually black, blue, or white in color to a different setting than the pin currently is, and it should be very close to the SATA connector cable receptor. All it does is connect two pins like a switch.