View Single Post
Old 07-31-2007, 01:04 AM   #207 (permalink)
magnethead
Tech Hardware Team
 
Join Date: Mar 2006
Location: TX
Posts: 1,786
OS: XPH, 2K

My System

Blog Entries: 2
Send a message via AIM to magnethead
Re: lets see your rig

Pharoah, how are those 2 fans working? Never seen anything even remotely close to them. Also, isee your foopy is still connected, but yet with a round cable??

I just took these pics, as I just removed my floppy and the 6 GB hard drive, and used the empty floppy hole (with solid cover of course) to hide all the extra unused wiring. Actually worked pretty well.

The reason you only see one run of PSU cable is because the other length is coiled (though un-neatly) between the hard drive tray and the bottom of the case, with the SATA adapter and 2 front fans ran to it and that's all. The 2 CD's are on a Y cable to the same PSU dongle, and the top, CPU, and rear fans are on the end dogle of the PSU cable pigtailed to eachother. So really only 4 dongle's are being used, 2 on each. The blue/green side fan runs off the mobo header and a Zalman Fanmate 2 (seen hanging on the vertical desk riser for the top shelf).

I will post new pics when the tri-color CPU fan arrives. So i'll have a quad color PSU fan, a blue and green side fan, and a red/green/blue CPU fan. And the monotone main fans. Not bad colorwise, eh?










__________________
AIM me: MAGNET794
For proper support: what are you running? video card, cpu, m/board, ram, power supply, brand, wattage, any error message?
PCI-E requires 26 amps at 12 volts. That's a 650W PSU.
Power Supply Info and Selection . Info on thermal compounds & application . TEST PSU USING MULTI-METER
magnethead is offline   Reply With Quote